Insert title here
  • 版权：钛锆铪工业网
  • 陕ICP备05006818号-2
  • 地址：陕西省西安市未央路96号 邮编：710016
  • 电话：029-86224484 邮箱：xxstip@c-nin.com
    • 发布时间：2017-02-06   来源：有色金属战略平台  点击量：1751
    文集名称Ti-2011 Proceedings of the 12th World Conference on Titanium
    国别中国类别世界钛会论文集
    出版单位科学出版社
    出版日期2012-01-01载文量516
    简介该文集为第十二届世界钛会的会议论文集，会议于2011年6月19—24日在中国北京国家会议中心举行。

    本文集文章列表
    Advances in Titanium Research and Technology in the UK............[3-9]
    Developments in Research and Applications in the Titanium Industry in the USA............[10-19]
    Recent Trends in CIS Titanium Industry Developments and Research Activities............[20-29]
    Recent Trends in Titanium Research and Development in Japan............[30-37]
    Recent Titanium Research and Developments in Germany............[38-46]
    Titanium Research and Development in France............[47-55]
    Recent Progress of Titanium Industry.Research and Development in China............[56-61]
    Recent Changes and Developments in Titanium Extraction............[65-70]
    Composition Control in Titanium Alloys............[71-74]
    Electrodeposition of Ti in Molten Salt at High Temperature............[75-78]
    The Revert System of the Titanium in TOHO's EB Plant............[79-83]
    Reduction of Titanium Oxides in Molten CaO-CaCl2............[84-86]
    The New Plant of the Kroll Process Titanium Sponge............[87-90]
    Technological Aspects of Designing of Electron Beam Unit for Melting of Titanium............[91-95]
    Numerical Simulation of Molten Fluid Behavior During Vacuum Arc Remelting Process............[96-100]
    A Novel Process for Preparing Titanium Powder by Calcium Vapor............[101-105]
    An Alternative Technology for Ilmenite Processing............[106-110]
    Chlorination of Reduced Ilmenite Concentrates and Synthetic Rutile............[111-115]
    Electrolysis of Cao in the Molten CaCl2 for Direct Reduction of TiO2............[116-120]
    Research on Main Elements Segregation of TC11 Alloy Ingot............[121-125]
    Defects Easy Occur in VAR Titanium Ingots............[126-129]
    Progress Towards a Titanium Metal Industry for South Africa............[130-134]
    From Powder to Low-Cost Titanium Parts............[135-140]
    The Effect of Raw Materials on Aluminum Volatilization in EBCHF Smelting Titanium Alloy............[141-144]
    The Study of the Present Situation of Alloying Elements for Titanium Alloys in China............[145-149]
    Equipment for EBCHM of Titanium-Current Trends and Prospects of Development............[150-153]
    Electrochemical Investigation on Ti4+ lon Reduction from Fluoride Melts with K2TiF6............[154-157]
    The Production Development and Technology Status of Sponge Titanium in China............[158-162]
    Progress of Some New Titanium Metallurgical Technologies............[163-168]
    Study of Chlorination Process of Natural Rutile in Fluidized Bed............[169-173]
    Electrodeposition of Titanium from Molten Chloride Electrolytes by Using Titanium Oxycarbide Anodes............[174-176]
    Preparation of Titanium Subchloride and its Electrodeposit in Chloride Melts............[177-180]
    Development of New Generation FFC Pilot Plant for Production of Low Cost Titanium and Titanium Alloys............[181-184]
    Expansion of Titanium Sponge Production Capacity............[185-187]
    The Technology Research on Electron Beam Cold Hearth Melting Furnace Using 100% Titanium Sponge to Produce High Quality Pure Titanium Ingot............[188-191]
    Equipment developed by International Company "ANTARES" for Electron Beam Melting of Titanium Ingots............[192-197]
    Properties of Micro-arc Oxidized Coating on Biomedical Titanium Alloys............[198-201]
    Research of Laser Rapid Forming Ti40 Burn Resistant Titanium Alloy............[202-205]
    Processing Map for Hot Working of Ti6321 Titanium Alloy............[209-213]
    Subtransus Deformation Behavior of a Titanium Alloy with Lamellar Structure............[214-218]
    Forming Mechanism of Flash in Linear Friction Welded Dissimilar Alloys of TC11 and TizAINb............[219-222]
    Modeling of Deformation and Temperature of the Continuous Rolling Process of Titanium Alloy Rod............[223-225]
    Understanding the Behaviour of Ti-5Al-5Mo-5V-3Cr during Subtransus Isothermal Forging............[226-230]
    Research of Hot Tandem Rolling Process of TC6 Titanium Alloy Bar............[231-233]
    Solid-state Recycling of Titanium Machining Chips by Severe Plastic Deformation............[234-238]
    Recrystallization of Commercially Pure Titanium During and Following Hot Deformation............[239-243]
    The Advance in the Plastic Forming Theory and Technology of Titanium Alloys............[244-251]
    Influence of Isothermal Forging Temperature on Microstructure and Mechanical Properties of Ti-6Al-2Sn-22r-3Mo-1Cr-2Nb-Si Titanium Alloy............[252-255]
    Improvement of Attenuation Uniformity on Titanium Alloy Billet............[256-260]
    Hot Deformation Behavior and Microstructure Evolution of BT25 Alloy with Lamellar Starting？Microstructure............[261-264]
    Characterization of Hot Deformation Behavior of Ti60 Alloy by Using Processing Map............[265-268]
    Construction of Processing Maps with High Precision for Ti-10V-2Fe-3AI Alloy............[269-273]
    The Processing Map and Optimization of Hot Workability of Ti53311S Titanium Alloy............[274-277]
    Effects of Deformation Rate on Microstructure and Tensile Properties of Cold Rolled Ti-3Al-2.5V Alloy Tube............[278-281]
    A Comparative Study of Various Flow Instability Criteria in Processing Map of TC21 Alloy............[282-286]
    Effect of Interface Morphology on Bonding Properties of Titanium Clad Steel Plate............[287-290]
    Study on Rotary Piercing Technology for High Strength Titanium............[291-294]
    Pack-rolling Process of Ultra-long Titanium Sheets............[295-297]
    FEM-Optimized Thermomechanical Processing of Titanium Alloy Blades for Steam Turbines............[298-301]
    Microstructure and Properties of TC25 Titanium Alloy Forged Rings............[302-304]
    Water Immerging Automatic UT for Titanium and Titanium Alloy Plate............[305-307]
    Effect of β Forging and β Annealing on the Microstructure and Properties of the Ti-6Al-22r-2V-1.5Mo ELI Titanium Alloy............[308-310]
    Correlation between Microstructures and Properties of TC21 Titanium Alloy φ350mm Bars............[311-313]
    Effects of Roll Poreessing Rate and Heat Treatment on Microstuctures and Mechanical Properties of Ti75 Alloy Tube............[314-317]
    Study on Microstructures and Mechanical Properties of BT25 Titanium Alloy Bars............[318-319]
    Microstructure and Properties of Ti-6Al-22r-2V-l. 5Mo Alloy Plate............[320-323]
    Unified Constitutive Equations for Hot Working of Wrought Two-phase Titanium Alloys............[324-327]
    Deformation Behavior under Die Partitioning Boundary during Titanium Alloy Large-scale Rib-web？Component Forming by Isothermal Local Loading............[328-332]
    Theoretical and Experimental Analysis of a Ring Compression Test for Ti-6Al-4V Titanium Alloy............[333-336]
    Investigation of Sheet-Titanium Drawability............[337-341]
    Ultrasonic Detection in the 3N zone of Titanium Alloys............[342-345]
    Influence of Loading Mode on the Multi-directional Forging of the Blade with a Damper Platform............[346-349]
    Ordering Process in Heat-Resistant Titanium Alloys............[350-353]
    Research on Microstructures and Mechanical Properties of the Big Size TA12 Titanium Alloy Bar............[354-356]
    Effect of Rolling Temperature on Microstructure and Mechanical Properties of Ti-6Al-3Nb-2Zr-1Mo Plate............[357-358]
    Effects of Heat Treatment on Microstructures and Mechanical Properties of BTi-6431S Alloy............[359-361]
    The Microstructure and Property of TC17 Titanium Alloy φ300mm Bars............[362-364]
    Fabrication High Homogeneous NbTi Alloy Bars for ITER Project............[365-368]
    Study on Chemical Composition and Macro/Micro-Structure of a Large Sized Ti1023 Alloy Bar............[369-372]
    The Effect of Hot Top Process on Large Diameter Ti6Al4V Top Composition............[373-375]
    Chemical Composition Controlling Technology for Large Diameter T16Al4V ELI Ingot............[376-378]
    Hot Workability of TIMETAL 54M（Ti-5Al-4V-0.75Mo-0.5Fe）............[379-383]
    Influence of TiH2 Addition on the Solidification Structure of Ti6Al4V Alloy by Induction Skull Melting............[384-387]
    Hot Compression Deformation Flow Behaviour Analysis of α+β Ti 6Al-2Sn-42r-6Mo Titanium Alloy............[388-391]
    Micro- and Nanostructure Evolution in Intermetallic Titanium Aluminides............[395-403]
    Microstructure Formation in Alpha-Beta Titanium Alloys............[404-409]
    General Regularities of Formation of the ω-phase in Binary Titanium-base Alloys with Metals of Ⅳ-Ⅷ,I Groups of the Periodic Table............[410-414]
    Simulation of Air Cooling Process after Solution Treatment of BT22 Titanium Alloy Forged Bars............[415-419]
    Deformation and Annealing Textures of Ti-45Nb Wires............[420-423]
    Twinning Structure in Beta-type TiNbPd Shape Memory Alloys............[424-427]
    Brazing Titanium Using Clad Ti-Zr-Cu-Ni Braze Alloys............[428-431]
    Relationship between Microstructure and Tensile Properties of in situ Synthesized （TiB+La2O3）/Ti Composite............[432-437]
    Cause Analysis of Fracture for TB5 Slab............[438-442]
    The Microstructures of TiNbTaZr Alloy Treated by Direct Rolling and Cross Rolling............[443-445]
    Microstructure and Deformation Micromechanisms of a β-metastable Titanium alloy Deterrruned by Conventional and in-situ Straining TEM............[446-449]
    Preparation of Thin Ti Films by IBAD............[450-453]
    Microstructure of Heat Treated Ti 15V 3Al 3Cr 3Sn after Deformation at Various Strain Rates............[454-458]
    Microstructure Evolution in Ti-Al-Mo-Fe-Mn-Cr-Cu Alloys containing Rare-Earth Metals............[459-463]
    Microstructure and Microtexture Associated to Heterogeneous Precipitation of the a Phase on β/βBoundaries in Ti17 Alloy:lnfluence of First Stages of αGB Formation............[464-467]
    Precipitation Sequences in Beta Metastable Phase of Ti-5553 Alloy During Ageing............[468-472]
    Stress and Strain Fields Calculations Associated with the Formation of Intragranular a Precipitates............[473-476]
    Effect of Oxygen Content and Working on Microstructural Evolution and Mechanical Properties of Biomedical Ti-6Al-4V Alloy Wire............[477-480]
    Evolution of Alpha→Beta Transformation in Ti-3Al-2.5V Alloy. Microstructural Changes and Properties Obtained............[481-484]
    First-principles Investigation on Phase Stability and Elastic Properties of β-Ti1-x-y-z NbxZrySnz Alloys............[485-488]
    Microstructure and Mechanical Properties of Friction Stir Processed Ti-6Al-4V............[489-492]
    Evolution of Beta Grain Size During Beta Phase Processing of Ti-6Al-4V............[493-496]
    Effect of Heat Treatment on Microstructure and Mechanical Properties of Titanium Recycled by Severe Plastic Deformation............[497-501]
    Microstructure Optimization by Hydrogen Treatment of β-Titanium Alloys............[502-507]
    Effect of Surface Condition and Microstructure on Hydrogen Uptake in Metastable β Titanium Alloys............[508-513]
    Research on the Dynamic Globularization Kinetics of Ti-17 Titanium Alloy with Initial Lamellar Microstructure during Hot Deformation............[514-517]
    Mechanical Properties of Titanium Alloys Produced in Egypt............[518-522]
    Quantitative Microstructural Analysis of Ti-6Al-4V Alloy after Hot Forging Process by Means of Stereological Morphometry............[523-526]
    High-temperature Deformation Behavior of as-cast TC21 Titanium Alloy............[527-530]
    Microstructural engineering for Improved Corrosion Resistance of a Ti-5%Ta-1.8%Nb Alloy............[531-535]
    Improvement of Mechanical Properties in Ti Alloys Using Heterogeneous Elemental Distribution............[536-539]
    Formation of Rotation in Titanium Alloys at Shock Loading............[540-543]
    Effect of Boron and Yttrium Slight Addition on Grain Refinement and Mechanical Properties of Ti-13 Cr-1Fe-3Al Alloys............[544-546]
    Effect of Compressive Stress on Phase Transformation in Ti-Fe-Mo Alloy During Hot Deformation............[547-551]
    Phase Transformation and Microstructure Evolution in Hot Rolled TB-13 Alloy during Continuous Heating............[552-555]
    In Situ SEM/EBSD Observations of hcp/bcc Phase Transformations in Commercially Pure Titanium............[556-559]
    Alpha 2 Precipitation in Exposed Ti6Al4V............[560-563]
    Early-stage α-phase and Ti2Cu Phase Formation in a Ternary Ti-V-Cu Alloy............[564-567]
    On the Occurrence of a Nano-scale FCC Phase in Thin-foil Specimens of Titanium Alloys............[568-572]
    Kinetics of Recrystallization and Grain Growth in Ti-17 Alloy............[573-576]
    Effect of Cold Rolling and Heat Treatment on Microstructures and Mechanical Properties in Ti-13Cr-lFe-3Al Alloys............[577-579]
    The Effects of Recrystallization Texture Evolution on Young's Modulus of Metastable β Titanium Alloy............[580-583]
    Effect of High-pressure Torsion Deformation on Isothermal ω Phase in β-Ti Alloys............[584-587]
    Flow Behavior and Microstructure Characteristic of Ti-5553 Alloy during Hot Deformation............[588-592]
    3D Observation of Isothermal ou Phase in β-Ti Alloy by Novel Orthogonal FIB/SEM System............[593-596]
    The Incorporation of ω Particles during Growing or Coarsening Process in Metastable β Titanium Alloy............[597-600]
    The Effect of VAR Process Parameters on Beta Flecks Formation in Ti-10V-2Fe-3Al............[601-604]
    Preparation of T150Ni30Cu10Pd10 Shape Memory Alloys by Rapid Solidification............[605-608]
    Precipitations Characteristics of Ti-60 Alloy during Long-term Aging Treatment at 600℃............[609-613]
    Fabrication and Microstructure Characteristics of Sintered Porous Biomaterial Based on Titanium Alloy for？Orthopedic Applications............[614-619]
    Improvement in Ultrasonic Inspectability by Development of Microstructural Controlled Low Noise Billet and High Sensitivity Probe for Ti-6Al-4V Alloy............[620-623]
    Finite-element Analysis of Microstructure Evolution in the Hot Deforming of TC4-DT Alloy............[624-627]
    Modeling of β→α Transformation in Complex Titanium Alloys............[628-631]
    FE2 Scheme for Simulation of Thermo-Mechanically Induced Phase Transformations and Residual Stresses in Ti6Al4V Components............[632-636]
    Effect of Cooling Rate on Phase Transformation and Microstructure of TC21 Titanium Alloy............[637-639]
    Morphological and Textural Evolution of the Alpha Phase during Hot Deformation of Two-Phase Ti-6Al-4V............[640-644]
    The Influence of Sc on Deformation Stability of Ti-6Al-4V Alloy Using Processing Map............[645-649]
    Quantitative Relationships between Microstructures and Hardness of as-cast Ti-6Al-4V Titanium Alloy............[650-652]
    Interdiffusion Study and Assessment of Mobility for Ti-Mo Alloys............[653-657]
    Age-hardening Behaivour and Microstructure of Ti-15-3 Alloy Aged at 573 K............[658-661]
    Martensitic Transformations in Casting Biomedical Titanium Alloys and Their Applications............[662-665]
    Thermal Stability and Grain Growth Behavior of Ultrafine Grained Commercially pure Titanium Fabricated by Equal Channel Angular Pressing............[666-670]
    Microstructure-Based Modeling of Duplex-Phase Titanium Deformation through Crystal Plasticity Finite Element Method............[671-675]
    Grain Structure Formation of Ti-6Al-4V Ingot during VAR Process............[676-679]
    Effect of Interstitial Impurities on Microstructure and Martensitic Transformation Behavior of Ti-23at.% Nb Alloy............[680-682]
    Deformation Textures of β Phase and α" Phase in Cold-Rolled Ti-Nb Alloys............[683-684]
    Experimental Investigation of Coarsening Behavior of TA15 Titanium Alloy in Beta-Phase Field............[685-688]
    Microstructure and Texture Evolution during β processing of Hypoeutectic Boron Modified Ti-6Al-4V Alloy............[689-693]
    Formation Conditions of Omega Phase in the Titanium Alloys after Quenching............[694-697]
    Effect of a Laths Size Distribution on Deformation Behaviour of Ti-5Al-5Mo-5V-3Cr............[698-704]
    Structure,Phase Composition,Physical Properties of Quenched VT16 Alloy............[705-708]
    The Effect of Cold Deformation on Structure and Deformation Induced Phase Transformations in Quenched（α+β）-alloys of Transition Class............[709-713]
    Understanding of the Chip Formation Process of Ti15V3Al3Sn3Cr Alloy............[714-718]
    Dissolution Kinetics of α Phase in TA6V Titanium Alloy............[719-723]
    Elimination of Structure Inhomogeneities during Sheet Processing of β-titanium Alloy............[724-728]
    Microstructural Characterization of Hot Deformed Ti-6Al-4V............[729-732]
    Determination of α-β Interface Sliding Mechanism in Ti-1100 Alloy during High Temperature Tensile............[733-736]
    Dynamic Phase Evolution in Titanium Alloy Ti-6Al-4V............[737-740]
    Dynamic Globularization Mechanism in TC21 Titanium Alloy during Hot Rolling............[741-744]
    Study on the Beneficial Effects of Duplex Aging on Microstructure Phenomena Determining the Fatigue life of the Metastable β-titanium Alloy Ti 38-644............[745-749]
    Study on the Crystal Structure of a" Martensite in a Ti-4Al-4.5Mo Titanium Alloy............[750-753]
    Densification Behavior of Ti-5Al-2.5Sn ELI Pre-alloyed Powders Under Hot Isostatic Pressing............[754-757]
    Model for Twin-variant Selection in Titanium Alloys............[758-762]
    Microstructure and Texture Inhomogeneity in Ti-10V-2Fe-3Al............[763-766]
    A Study of Plastic Deformation Mechanisms Associated with Twin Variant Selection in Titanium............[767-770]
    The Effect of Processing Temperature on Texture Evolution and Variant Selection during Phase Transformation in Ti-6A-4V............[771-775]
    Impact Deformation of Large Colony Ti6Al4V............[776-779]
    Evolution Microstructure of Forging Procedure and Effect of Mechanical Properties for Ti6Al4V-ELI Large ScaleBars............[780-782]
    Transmission Electron Microscopy of Deformed Ti-6Al-4V Micro-cantilevers............[783-786]
    Effects of Hot Deformation Parameters on Microstructure of Ti-600 Alloy............[787-790]
    Preparation of an Oriented FIB Bed Ti-6AI-4V Sample for in situ TEM Observations of Dislocation Transmission through α/β Interfaces............[791-794]
    Hierarchy of the Dislocation Glide Systems in Titanium Alloys by Atomic Simulation............[795-799]
    Beta Phase Decomposition during Ageing in Beta Ti Alloy with and without Carbon Additions............[800-803]
    Phase Field Simulation of the Stress Field Distribution in TiAI Alloys during Phase Transformation............[804-807]
    Microstructure Evolution of TC16 Titanium Alloy During Hot Deformation in β Phase Field............[808-811]
    Phase Field Simulation of Grain Growth in Ti-6Al-4V during High Temperature Deformation............[812-815]
    Gas Tungsten Arc Welding of Ti2 AiNb Based Alloy Sheet............[816-818]
    Effect of Rolling and Annealing Process on TA2 Texture............[819-822]
    Preparation and Microstructure of Porous Ti/IrO2 Electrodes............[823-826]
    Study on Sintering-hot Deformed Rare-earth Containing Ti-Fe-Mo-Y Alloy............[827-830]
    Microstructure and Mechanical Properties of TA15 Titanium Alloy φ8 mm Tube............[831-833]
    Properties and Applications of Titanium Alloys in Transport............[837-844]
    Effect of Si-Addition as a Grain Refiner on Microstructure and Properties of Ti-6Al-4V Alloy............[845-849]
    Phase Constitution and Heat Treatment Behavior of Ti-Mn and Ti-Mn-Al Alloys............[850-852]
    Fatigue Investigations and Numerical Modeling of Forged Ti6Al4V in Different Microstructural Conditions............[853-857]
    Effect of Nitride Coatings on the Wear and Fatigue Behavior of Titanium Alloy Ti-6Al-4V............[858-861]
    Advances in Low Temperature (<0. 25Tm) Creep Deformation Mechanisms of α,α+β,and β Titanium Alloys............[862-866]
    Composite Modelling of a Two-phase Titanium Alloy............[867-869]
    TiPt Base High Temperature Shape Memory Alloys............[870-874]
    A Quantitative Approach of Dislocation Mobility in Ti64 and β-metastable Ti-alloys Using TEM in Situ Experiment............[875-878]
    How Texture and Microtexture Influence Dwell Fatigue Lifetime in Forged IMI834 Titanium Alloys............[879-882]
    Advanced Titanium Alloys Containing Micrometer-size Particles............[883-887]
    Damping Capacity and Surface Hardness of Plasma Nitrided Ti-15Nb Alloy............[888-891]
    Ductility and High Cycle Fatigue Behavior of Boron-Modified Orthorhombic Titanium Alloys............[892-895]
    Deformation Mechanisms and Fatigue Crack Initiation in β Titanium Alloys in Relation with Microstructure............[896-900]
    Effects of Severe Plastic Deformation on Grain Refinements and Fatigue Performance of the Metastable Beta-Titanium Alloy TIMETAL LCB............[901-904]
    Experimental Evidence of Dislocation Slip in "Gum Metal-type β titanium Alloy............[905-908]
    Miroscale Deformation in a Two-phase Ti-alloy Studied Using Strain Mapping Techniques............[909-913]
    Cyclic Deformation Response of Ti-5Al-5V-5Mo-3Cr (Ti-5553) Alloy under the Solutionized-Aged Condition............[914-918]
    Strain Localization and Planar-slip Behavior in Compressive Cyclic Deformation of the Beta-annealed Ti-5Al-5V-5Mo-3Cr Alloy............[919-923]
    Phase Morphologies and Mechanical Properties during Heat Treatment of a Hotforged near-β Titanium Alloy............[924-927]
    Effects of Microstructure on Deformation and Fracture Behavior of Titanium Alloys............[928-931]
    Effect of Deformation Temperature on Microstructures and Mechanical Properties of TC4-DT Titanium Alloy............[932-936]
    Analysis of the Tension and Creep Behavior of Ti-5Al-2.5Sn(wt.％) Using In-Situ SEM Experiments............[937-941]
    Thermal Oxidized Layer Breakdown Effect on SCC Behavior in An α Titanium Alloy............[942-945]
    Mechanism of Mottle Pattern in Commercially Pure Titanium Round Bar............[946-949]
    Ti6Al4V Anisotropy and Texture Evolution Predictions Using Multisite and Self Consistent Crystal Plasticity Models............[950-953]
    The Residual Stress Varying of Shot Peened TC4-DT Titanium Alloy............[954-958]
    Influence of Heating Temperature of Hot Rolling on In-Plane Anisotropy of Ti-4.5Al-2Mo-1.6V-0.5Fe-0.3Si-0.03C............[959-963]
    Quantification of Microstructural Features and Application of Artificial Neural Network in Correlation of Microstructure and Property of Ti-Alloys............[964-967]
    Mechanical Anisotropy of Ti-6Al-4V Alloy with α' martensite Microstructure............[968-971]
    Influence of Mechanical Surface Treatments on Notched Fatigue of Various Titanium Alloys............[972-975]
    Effect of Microstructure on Mechanical Properties in Pure Titanium Containing Small Amount of Iron............[976-979]
    Influence of Alloy Elements on Machinability, Weldability and Hot Deformation Resistance in Alpha-beta Titanium Alloys Containing Cr,Fe and C............[980-983]
    Effects of Thermo-mechanical Treatments on Microstructures and Mechanical Properties :TIMETAL-54M vs. Ti-6Al-4V............[984-988]
    Fatigue Properties of a New High Strength and High Toughness Titanium Alloy............[989-992]
    Investigation of Faceted Crack Initiation and Propagation in Near-alpha Titanium Alloys............[993-997]
    Creation of High Strength and High Ductility Titanium Materials by Harmonic Microstructure Control............[998-1001]
    Steady State Creep of Ti-600 Alloy at Elevated Temperature............[1002-1005]
    The Influence of Microstructure and Microtexture on Fatigue crack Initiation and Growth in α+β titanium............[1006-1010]
    Flow Behavior of Commercial Pure Titanium Considering Interstitial Elements............[1011-1015]
    Effect of Two Heat Treatments on Thermal Stability and Creep Property of a Highly β Stabilized Titanium Alloy............[1016-1020]
    Effect of Trace B Addition on Hot Workability and High-Cycle Fatigue Property of Ti-6Al-4V Alloy............[1021-1024]
    Texture of Pure Titanium Formed by Cold-Rolling and Its Influence on Mechanical and Fatigue Properties............[1025-1029]
    Fatigue Behaviors of Commercially Pure Titanium with Harmonic Microstructure............[1030-1033]
    Ductility Improvement in High Strength Ti-Mo Alloys by Transition of Deformation Mode............[1034-1037]
    Effect of Heat Treatment on Microstructure and Mechanical Properties of Ti-6Al-4V ELI Alloy Plate............[1038-1041]
    Mechanical Property Study of Ti-45Nb Alloy Wires Used in Fastener............[1042-1044]
    Study of Deformation Mechanisms in an α-β annealed Ti-6Al-4V Titanium Alloy on Charpy Specimens............[1045-1048]
    Characteristic Tensile Deformation Behaviors in Ti-5Al-2Fe-3Mo............[1049-1053]
    Study on Precipitates Behavior During Heat Treatment in Ti-B19 Titanium Alloy............[1054-1057]
    Effect of Processing Parameters on Microstructure and Mechanical Properties of CT20 Alloy Tube............[1058-1060]
    Grain Boundary Strain Transfer and Anisotropic Polycrystalline Deformation in Commercial Purity Titanium............[1061-1065]
    The Effect of Different Solution Treatment on Ti50Ni24.9Cu25Y0.1 Alloy............[1066-1070]
    Quantitative Study on Relationships between Mechanical Properties and Characteristics of Primary α Phase for a Solution-treated Near-β Titanium Alloy............[1071-1073]
    The Effects of Bimodal Microstructure Characteristics on Susceptibility to Adiabatic Shear Bands of Modified Ti-6Al-4V Alloys............[1074-1078]
    Effect of Heat treatment on Microstructure and Properties of Ti-3Al-2. 5V Titanium Alloy Tubes............[1079-1082]
    Elements of Nb Content and Sn and Zr Additions on the Young's Modulus of Ti-Nb-(5Sn)-(5Zr) Alloys by Means of Diffusion Couple and Nanoindentation............[1083-1084]
    Trial Manufacturing and Characterization of Tungsten Fiber Reinforced Titanium Composite............[1085-1089]
    In-situ Thermal Stress Measurement of Tungsten Fiber Reinforced Titanium Composite by X-ray Diffraction............[1090-1094]
    X-ray Stress Measurement of Tungsten Fiber Reinforced Titanium Composite Produced by Spot Welding............[1095-1099]
    Analysis of Heterogeneous Deformation Behavior by Full Constraints Model in Alpha-titanium Alloy............[1100-1103]
    Effect of Heat Treatment on Fracture Toughness Properties of TC4-DT Alloy............[1104-1106]
    Effects of Re-heat Treatment on Microstructure and Mechanical Property of TC4DT Titanium Alloy Plates............[1107-1109]
    Effect of Omega Phase on Shape Memory Properties of Ti-base Alloys............[1110-1113]
    The Important Technology Parameters of Elbow Made by Diameter-expanding and Pushing-bend Method............[1114-1118]
    Flow Stress Behavior and Microstructural Evolution of Cast TA24 Titanium Alloy During Hot Deformation............[1119-1123]
    Measurement of Plastic Zone at Fatigue Crack Tip by Microhardness and Nanoindentation Technique............[1124-1127]
    The Preparation and Properties of Dissimilar Joints between Ti-6Ta and 304L Stainless Steel............[1128-1131]
    Deformation Behaviour of Surface Treated Two-phase Titanium Alloy in Bending............[1132-1136]
    High Cycle Fatigue Strength of Hydrostatically Extruded Nanocrystalline CP Titanium............[1137-1140]
    Properties of Ti-5Al-4Mo-4V-4Cr-3Zr Titanium Alloy Bar............[1141-1144]
    Analysis of Double Shear Strength in β21S Titanium Alloy............[1145-1147]
    Comparative Study,in Pure Titanium Sheet,of the Microstructural Evolution Induced by Incremental Forming Process and Plane Strain Tensile Tests............[1148-1151]
    Crystal Plasticity and Quasi-Cleavage Facet Formation During Fatigue Loading............[1152-1155]
    Fatigue life Variations Due to Microstructure in Ti-6Al-4V............[1156-1160]
    Effect of Oxygen Content on the Properties of Commercial Pure Titanium Tubes............[1161-1164]
    Deformation and Crack Propagation in Ti153 Alloy............[1165-1168]
    Failure Behaviour and Energy Adsorption in Gum Metal (Ti-36Nb-2Ta-3Zr-O)............[1169-1173]
    Effects of Cold-rolling Reduction and Annealing Condition on Plane Anisotropy of Mechanical Properties of α+β Type Titanium Alloy Sheets............[1174-1178]
    Evaluation of Wear Properties of Ti/SiC Nano-composite Surface Layer Fabricated Using Friction Stir Processing............[1179-1182]
    Structural Relaxation of Ti-based Bulk Metallic Glasses............[1183-1186]
    The Effect of Oxygen on Mechanical Properties and Deformation Modes of Ti-2Al-xO Alloys at Different Temperatures............[1187-1190]
    Influence of Microstructure on Tensile properties of β-metastable Ti17 Alloy............[1191-1195]
    Effects of Combined Process on Mechanical Properties of TB2 Titanium Alloy Bars............[1196-1198]
    Effect of Rolling Process on High Cycle Fatigue Property of Ti-6Al-4V Sheet............[1199-1201]
    Influence of Loading Manner on Fatigue and Dwell-fatigue Behaviour of Ti6242............[1202-1205]
    Aging Response and Properties of Ti-7333 Titanium Alloy............[1206-1208]
    Influence of Heat-treatment on Microstructure and Mechanical Properties of Ti-6Al-4V ELI Plate............[1209-1211]
    Structure and Electrochemical Hydrogen Storage Properties of Ti2Ni Alloys............[1212-1218]
    The Influence of Loading Directions on the Failure of the Bicrystal in α-Ti with Grain-boundary Penetrating Dislocations............[1219-1222]
    Effect of Aging Temperature on Microstructure and Mechanical Behavior of Aged Ti-10V-2Fe-3Al Alloy with Prestrain............[1223-1226]
    Creep Behavior of High Temperature Titanium Alloys at Low Stress-High Temperature Regime............[1227-1230]
    Deformation Features at Rolling and Tension under Current in Ti-based Alloys............[1231-1233]
    Study on High Cycle Fatigue Behavior and Fracture Surface of TA15 Alloy............[1234-1236]
    Influence of Al Equivalent on Mechanical Properties of T16Al4V ELI............[1237-1239]
    Effect of Non-metallic Elements Si, C and O on Mechanical Properties of High Temperature Titanium Alloys............[1240-1243]
    Effect of Heat Treatment on Properties of TG6 Titanium Alloy............[1244-1246]
    Effect of Hot-rolling on Microstructure and Mechanical Property of BT14 Alloy............[1247-1248]
    Effect of Heat Treatment Process on Structure and Property of Ti55531............[1249-1251]
    Effect of Heat Treating Regime on Mechanical Property and Microstructure of BT18Y Titanium Alloy............[1252-1254]
    Effects of Heat Treatment on Microstructures and Properties of TA15 Alloy............[1255-1257]
    The Effect of Heat Treatment Process on Microstructure and Mechanical Property of Large-sized TC18 Titanium Alloy Bar............[1258-1260]
    The Microstructures and Mechanical Properties of TB3 Alloy............[1261-1263]
    Machinability of TIMETAL 54M Evaluated by Milling............[1264-1268]
    Effect of Microstructure on the Properties of a Near-α High-Temperature Titanium Alloy............[1269-1271]
    Modelling Materials Properties critical to Simulation of Thermomechanical Processing in Titanium Alloys............[1272-1276]
    On the Relation between Microstructure, Texture and Tensile Deformation Behavior of Ti3Al2. 5V Alloy at Room Temperature............[1277-1280]
    The Role of Microtexture on Fatigue Lifetime Variability and Crack Initiation Mechanisms............[1281-1284]
    Crack Orientation Dependence of Fatigue in Titanium Single Crystals............[1285-1289]
    Experimental Study of the Deformation Mechanisms in Textured Alpha-titanium Alloy Sheets............[1290-1293]
    The Role of Gd Addition in the Microstructure and Mechanical Property of Directionally Solidified Ti46Al0. 5W0. 5Si Alloys............[1294-1298]
    Effect of Surfactant on Surface Morphology and Wear Resistance of a Micro Arc Oxidized Cp-Ti............[1299-1302]
    Primary α-Phase VST5553 Alloy with Lamellar Structure Properties Effect............[1303-1311]
    Short Fatigue Crack Initiation and Propagation in Ti-6Al-4V with Short-bar and Lamellar Microstructures............[1312-1316]
    Effect of Mo Content on Creep Behavior of a Near-alpha Titanium Alloy Ti-5.8Al-4.0 Sn- 3. 5Zr-0.4Mo-0.4Si -0.4Nb-0. 4Ta-0.05C............[1317-1320]
    EBSD Orientation Analysis of Secondary Cracks in Fatigued Ti-60 Specimens............[1321-1324]
    Effects of Heat Treatment on Transformation and Shape Memory Behavior of Ti-49. 8Ni Cold-drawn Wire............[1325-1327]
    Structural Stability and Stacking Fault Energies in β Ti-Nb Alloys: An Ab Initio Study............[1328-1331]
    Influence of Oxygen Content on the Hardness of Ti-23Nb-0.7Ta-2Zr-O Alloy............[1332-1334]
    Effects of Hot-rolling Process on the Microstructure and Mechanical Properties of Ti-4.5Al3Mo-1V Alloy Plates............[1335-1337]
    Surface Layer Properties and Fatigue Behavior in Ti-6Al-4V: Comparing Results after Laser Shock Peening,Shot Peening and Ball-Burnishing............[1338-1341]
    Damage-tolerance Property of TA15 alloy............[1342-1344]
    Research for Thermal Stability of Ti-6.5Al-3.5Mo-0.2Si............[1345-1348]
    Fabrication and Characterization of Porous Ti by Powder Metallurgy............[1349-1351]
    Studies and Researches on TiN Coating of Cutting Plates by Chemical Vapor Deposition Method at High Temperatures............[1352-1354]
    Development of High Temperature TiAl Alloys............[1357-1362]
    Investigation of Inert Refractory systems for Investment Cast TiAl Alloys............[1363-1367]
    Microstructures of directionally solidified Ti-45Al-6Nb-0.3B alloys............[1368-1373]
    Isothermal Low-cycle and Thermo-mechanical Fatigue of a High-strength Multiphase Titanium Aluminide Alloy............[1374-1378]
    Microstructure Evolution of Rapidly Solidified TiAl Alloys with Various Nb Contents............[1379-1382]
    Opportunities of Increase of Mechanical Properties of the Deformed Semifinished Products from Ti-Al-Nb System Alloys............[1383-1386]
    Problems of Formation of Fine-grained Structure in Castings from Ti-Al System Alloys (γ-Alloys)............[1387-1389]
    Designed Experiments for Optimized Mechanical Properties in Cast and PM TiAl-based Alloys............[1390-1393]
    Influence of Ti/Al Ratio and Al Powder Size on Pore Features of PM Titanium Aluminide Porous Material............[1394-1397]
    Sintering of gamma Titanium Aluminide (TiAl) Alloys Aided by Small Additions of Copper............[1398-1401]
    Characterisation of a Ductile Ti-3Al-2.5V/TiBp Composite Produced via Mechanical Alloying............[1402-1406]
    Carbides in Ti-45Al-5Nb Alloys with Different Carbon Contents............[1407-1410]
    Effect of Nb Content on Phase Evolutions and Microstructure of TiAl/Al2O3 Nano-composite Prepared by Mechano-thermal Processing............[1411-1415]
    The Influence of Cooling Rate and Alloy Composition on the Formation of Borides during Solidification of Boron-containing TiAl Alloys............[1416-1420]
    The Effect of Molybdenum on the Phase Transformation Behavior of β/γ-TiAl alloys............[1421-1424]
    The Transformation Mechanism of Beta Phase to Omega-related Phases in Nb-rich Gamma-TiAl Alloys Studied by in-situ High-energy X-ray Diffraction............[1425-1428]
    Shear Localization and Cracking during Hot-working of Gamma-Based Titanium Aluminides............[1429-1432]
    Fatigue Behaviour of Advanced γ TiAl Alloys Subjected to Small Particle Impacts............[1433-1436]
    The Influence of Thermomechanical Processing on the Microstructure of Particu-late Reinforced Titanium Metal Matrix Composites............[1437-1441]
    Effect of Reinforcement Size and Distribution on Tensile and Wear Properties of Titanium Matrix Composites by Horizontal-type Centrifugal Casting............[1442-1446]
    Microstructure and Properties of Microstructurally Refined Cast Ti46Al8Nb and Ti46Al8Ta............[1447-1450]
    Strengthening Mechanism of Ti3Al (α+β)Ti Dual Alloy's Joining Interface............[1451-1453]
    Characterization of microstructure and texture of a cold-rolled high Nb containing TiAl Alloy............[1454-1456]
    Fabrication of Ti2AlC/Ti-44Al-6Nb-0.3Y Composite by Spark Plasma Sintering............[1457-1459]
    Rapid Solidification of Ti-Al Alloys under Electromagnetic Levitation Condition............[1460-1462]
    Hot Workability of Orthorhombic Ti-22Al-11Nb-2Mo-1Fe Alloy............[1463-1466]
    Flow Behavior and Microstructure Evolution of Ti-46Al-6(Cr, Nb,Si,B) Alloy During Hot Compression............[1467-1470]
    Application of Zirconia Ceramic Moulds for Investment Casting of TiAl Alloys............[1471-1474]
    The Phase Transformation and Microstructure Evolution during Heating of Ti2 Al-Nb-based Alloys............[1475-1477]
    Influence of Oxygen on the Solidification Behavior of High-Nb TiAl Alloys............[1478-1480]
    Fabrication of Continuous SiC Fiber Reinforced Ti-Al Intermetallic Composites using Elemental Foils............[1481-1485]
    Hot Deformation Behavior of a β-solidified TiAl Alloy............[1486-1490]
    Phase Transition in Directionally Solidified TiAl-based Alloys Containing Nb and Mo............[1491-1493]
    Interfacial Reaction and Microstructure Evolution of the Matrix in Mo-coated SiC Fiber Reinforced Ti6Al4V Composite............[1494-1498]
    Research on High-temperature Creep Properties of TP-650 Titanium Matrix Composites............[1499-1501]
    Study on Explosive Welding Effect of Large Area Titanium/Steel Clad Plates on Different Dynamite Arrangement............[1502-1505]
    Formation Process of Ti-Al Intermetallics during Solid-Liquid Reaction between Titanium and Aluminum Foils............[1506-1510]
    Compressive Properties of High Nb-TiAl Porous Materials Fabricated by Element Powder Metallurgy............[1511-1514]
    Precipitation Process of The New Intermetallic γ1 Phase in Ti-Al-Nb Ternary System............[1515-1518]
    On the Site Ordering Behaviors of Elements in Ti3Al and Ti2AlNb-based Intermetallics by using Sublattice Model Supported with ab initio calculations............[1519-1522]
    Microstructure and Mechanical Properties of TiB and Ti-6Al-4V Composites by Powder-metallurgy............[1523-1526]
    Nudeation of Crystallization in Titanium and Vitreous State in Glass-forming Melt............[1527-1531]
    Preparation and Characterization of High Titanium Ferrous with Low Oxygen Content by Enhanced Reduction-SHS............[1532-1537]
    Effects of the Surface Fine-grain Layer on the Mechanical Properties of Cast TiAl............[1538-1544]
    Room and Elevated Temperature Tensile Properties of SiCf/TC17 Composite............[1545-1548]
    FEM Simulation of Hot Compression of TiAl on Gleeble Simulator............[1549-1552]
    Influence of Extrusion Temperature on Microstructure of Ti-47Al-2Cr-2Nb-0.15B............[1553-1557]
    Manufacturing of γ-TiAl Sheet by Hot Packed Rolling of Powder Metallurgy Preform............[1558-1562]
    Molecular Dynamics Simulation of the Tensile Deformation of <110> Tilt Grain Boundaries in Gamma TiAl............[1563-1566]
    Synthesis of Ti2AlN Cermet Strengthened by Al2O3............[1567-1570]
    Microstructure Refinement and Improvement of Mechanical Properties of as-cast TiAl Based Intermetallics with Yttrium and Boron Addition............[1571-1574]
    Effects of Mo Addition on the Microstructure and Mechanical Properties of Ti45Al5Nb0.3Y Alloy............[1575-1578]
    Study on Production of Pre-alloyed Powders and Powder Metallurgy Processing of A Gamma Titanium Aluminide............[1579-1582]
    Development of Welding Technologies in Titanium Component Manufacturing............[1585-1591]
    Comparison of Different Routes for Production of CP-Ti Powder Compacts used as Preform for Forging of Con-rod............[1592-1596]
    Free-machining Titanium Alloys Based on Ti 15V 3Al 3Cr 3Sn............[1597-1601]
    Infrared Brazing Ti50Ni50 and Ti-15-3 Alloys Using Two Ag-based Fillers............[1602-1606]
    High Performance Machining of Ti-834: Mechanisms of Mierostructural Damage............[1607-1611]
    Diffusion Bonding of Ti6Al4V using Encapsulation-free Hot Isostatic Pressing............[1612-1615]
    Friction Stir Welding of Titanium Alloy using a Co-based Alloy Tool............[1616-1620]
    Powder Mixed Electrical Discharge Machining of Titanium Alloy (Ti-6Al-4V)............[1621-1623]
    Study on Porosity Formation in the Keyhole Mode Electron Beam Full-penetration Welding of Titanium Alloys............[1624-1628]
    Post-weld Atmospheric Contamination of Gas Tungsten Arc Deposited Welds in Commercially Pure and Ti-6Al-4V Titanium Alloys............[1629-1633]
    Study on Microstructures and Mechanical Properties of Gr5-SS304 Clad Plate Manufactured by Explosive Welding............[1634-1638]
    High Performance Titanium Powder Metallurgy Components Produced from Hydrogenated Titanium Powder by Low Cost Blended Elemental Approach............[1639-1643]
    Discussion on X-ray Test Method of T-shaped Titanium Castings............[1644-1646]
    Research on TIG Manual Welding Technology of Ti-3Al-2Mo-2Zr Titanium Alloy............[1647-1650]
    Isothermal Local Loading Technology and Its Application in Large-scale Integral Component Forming of Ti-alloy............[1651-1655]
    Oxidation Behavior of Cast Alpha-Titanium Scrap Blends for Exhaust Systems Applications............[1656-1661]
    Calciothermic Reduction of Ti-6Al-4V............[1662-1665]
    Manufacture of Titanium condenser tubes for Nuclear industry in China............[1666-1669]
    The Influence and Mechanism of Rare Earth Elements on Microstructure and Performance to Welded Titanium Cathode Drum for Copper Foil Production............[1670-1675]
    Preparation of Unitary Titanium Porous Restrictor............[1676-1680]
    Finite Element Analysis of Coupling Force for TiNiFe Shape Memory Pipe Coupling............[1681-1684]
    Microstructure and Mechanical Property of Linear Friction Weldment of a Nearalpha Titanium Alloy Ti-60............[1685-1689]
    Research on Surface Properties of TA2 Commercially Pure Titanium Surface by Friction Stir Processing............[1690-1693]
    Net Shape Processing of Titanium Alloys for Enhanced Performance and Improved Affordability............[1697-1703]
    Synthesis of Amorphous/Nanocrystalline Ni-Ti Biomaterial Powders by Mechanical Alloying............[1704-1708]
    Single Press and Sinter of ITP Process Ti6Al4V Powder............[1709-1714]
    Layer Build of Titanium Alloy Complex-Geometry Components for Rocket Engines............[1715-1718]
    Optimization of Parameters for Pressureless Sintering of Titanium and Ti-6Al-4V Powders by a Taguchi Method............[1719-1721]
    Beta Processing of Ti6Al4V-Microstructure and Properties............[1722-1725]
    Simulating and Predicting the Process of Hot isostatic Pressing of a Casing Part with Ti6Al4V Powder............[1726-1729]
    Microstructure and Mechanical Properties of Laser Metal Deposited Ti-6Al-4V............[1730-1734]
    Insights into the Formation of Titanium in the TiROTM Process............[1735-1739]
    Microstructural Manipulation and Mechanical Properties of Ti-24Nb-4Zr-8Sn alloy Manufactured by Selective Laser Melting............[1740-1743]
    The Application of Isothermal Near Net-shape Forming Technology on Titanium Complicated Load-bearing Structures............[1744-1748]
    The Use of Titanium and Titanium Alloy Powder Compact Forging to Produce Near-Net Shaped Rocker Arms and The Influence of Processing Conditions............[1749-1753]
    Role of Hydrogen and Alloying Elements in Titanium Hydride Based BEPM of Titanium Alloys............[1754-1758]
    Development of Low-cost and High-strength Titanium Alloy by Powder Metallurgical Process............[1759-1762]
    Effect of Modified-Oxide Mold on the α-case for Titanium Lost Wax Casting............[1763-1766]
    Full-density Titanium Materials Fabricated by High Velocity Compaction Technology............[1767-1769]
    Chloride Impurities in Titanium Powder Metallurgy-A Review............[1770-1774]
    Aqueous Binder for Powder Injection Moulding (PIM) of Ti and Ti-6Al-4V Alloy Powders............[1775-1778]
    Numerical Simulation of Counter Gravity Casting of TiAl Blades............[1779-1782]
    Effects of Heating Temperatures on Hot Spinning of TA15 Alloy Thin-walled Shell............[1783-1786]
    Preliminary Discussion of the Closing Mechanism of TC10 Alloy Casting Imperfections in HIP............[1787-1791]
    The Fluidity of Cast Ti-1100 Alloy in a Centrifugal Casting Machine............[1792-1795]
    The Effect of Isothermal Sintering Time on the Sintered Microstructure and Mechanical Properties of Ti-3Ni-(3-4)Si Alloys............[1796-1799]
    Near-net Shape Processing of High Nb Containing TiAl Alloying Powder by Gelcasting............[1800-1803]
    Experimental Study on Near-Net-Shape Forming of Titanium Alloy Powders Complex Parts by Hot Isostatic Pressing............[1804-1807]
    Homogeneous Flow and Superplastic Forming Process of Ti-Zr-Cu-Pd-Sn Bulk Metallic Glass in Supercooled Liquid Region............[1808-1811]
    Injection Molding of Mechanical Alloyed Ti-Fe-Zr Powder............[1812-1816]
    Advance in Powder Metallurgy of Titanium............[1817-1820]
    Superplastic Properties of Fine Grain TIMETAL(R) 54M (Ti-5Al-4V-0.75Mo-0.5Fe)............[1821-1825]
    Characteristics of Microwave Sintering of Titanium Powder Compacts............[1826-1829]
    Influence of Build Geometry on Beta Grain Structure and Texture during Additive Layer Manufacture (ALM) of Ti-6Al-4V by Electron Beam Selective Melting............[1830-1834]
    Densification and Properties of Ti-5Al-2.5Sn Alloy from Atomized Powder............[1835-1838]
    Study on Powder Metallurgy TC11 Alloy and Near-Net-Shape Process............[1839-1843]
    The Effect of Sampling Method on Mechanical Properties of Titanium Casting............[1844-1847]
    Development of Titanium Alloys with Corrosion Resistance in Aqueous Fluoride Solutions............[1851-1856]
    The Effect of High Temperature Oxidation on the Fatigue Fracture Mechanism of Ti-4Al-2V Alloy............[1857-1859]
    Notched Tensile Fracture of Ti-6Al-4V Laser Welds at Elevated Temperatures............[1860-1863]
    Suppressing the Alpha-casing of Ti-alloys by a Combined Al-and F-treatment............[1864-1867]
    Solid Metal Induced Embrittlement of Titanium Alloys in Contact with Copper............[1868-1871]
    High Cycle Fatigue Properties of Ti-834 Following Prolonged Thermal Exposure in air............[1872-1876]
    The Research on the Mechanism and Prevention of Solid Particle Erosion for Titanium Alloy............[1877-1880]
    Corrosion Resistance and Hardness Properties of Electroless Ni-P Coatings on Ti-6Al-4V Titanium Alloy............[1881-1884]
    Influence of Hydrogen Environment on the Mechanical Properties of Cast and Electron Beam Melted Ti-6Al-4V............[1885-1888]
    Study on the Microstructure and Properties of Ti40 Titanium Alloy by Thermo-hydrogenation Treatment............[1889-1893]
    Characterization of TiNi Gas-atomized Powders and Thermally Sprayed Coating............[1894-1897]
    In Situ Formation of TiN Coating on TA2 Pure Titanium via Laser Surface Nitriding............[1898-1901]
    The Influence of Pre-oxidation in a Silica-powder Pack on the Cyclic Oxidation Behavior of High Nb-TiAl Alloys............[1902-1905]
    Titanium and Titanium Alloy Coatings for Corrosion Protection............[1906-1910]
    Inoxidizability of NiCoCrAlY Coatings Deposited on Ti Alloys by Magnetron Sput-tering............[1911-1914]
    Properties of Lanthanum Containing Free-machining Titanium Alloys with Re-gard to Localized Corrosion............[1915-1919]
    A Mechanism of Nickel Deposition on Titanium Substrate by High Speed Electro-plating............[1920-1923]
    Anodization Replica of Precipitates in Age-Hardening Ti Alloys............[1924-1927]
    Study of Surface Properties of Ti-6Al-4V with Double-glow Plasma Non-hydrogen Carburizing............[1928-1931]
    Extending the Use of Titanium Alloys on A350XWB............[1935-1940]
    Microstructure and Properties of the AlCuFeCr Coating Magnetron Sputtered on TIMETAL 834............[1941-1945]
    Producing Titanium Alloys with Sub Microcrystalline Structure for Manufacturing Parts of Turbine Engine............[1946-1947]
    A Novel Approach For The Fabrication of High Performance Titanium Alloy Laminate For Aerospace Application............[1948-1951]
    Prediction of the Microstructure Morphology and Tensile Properties in Titanium Alloy............[1952-1956]
    Analysis on Turning Ti-6Al-4V with Different Cooling Methods............[1957-1960]
    Rough Turning of Titanium Alloy (6Al-4V)............[1961-1964]
    Generating a Closed Simulation Chain for Hot Forged Aerospace Components to Optimize Fatigue Behaviour............[1965-1968]
    Investigation of the Efficiency of the Ti555 Compared with TA6V Alloy in the Case of an Aeronautic Application............[1969-1973]
    Stress Gradient Effect on the Cracking Process of a Ti-6Al-4V Titanium Alloy un-der Fretting Loading and Comparison of Non-local Predicted Nucleation Approaches............[1974-1978]
    Novel Fatigue Characterization and its Evaluation on a Forged Ti-6Al-4V Component............[1979-1983]
    Fabrication of Large Scale Bars of Ti-6Al-4V ELI for Aerospace Application............[1984-1987]
    Industrial Research and Application of New High-strength TB8 Titanium Alloy............[1988-1990]
    Fretting Fatigue Cracking Process of a Ti-10V-2Fe-3Al Titanium Alloy............[1991-1994]
    Microstructure and Microtexture of Linear Friction Welded T1-6Al-4V............[1995-1999]
    Research and Development of Damage Tolerance Titanium Alloys for Aeronautical Use in China............[2000-2004]
    The Vacuum Heat Treatment of Titanium Alloys for Commercial Airframes............[2005-2006]
    Forming Technology of Large-diameter,Thin-walled and Weldless Tube of TC4 Alloy............[2007-2011]
    Processing,Microstructure and Properties of a Large-scale Ti-6Al-4V Alloy Plate............[2012-2016]
    Rolling Process of Wide and Thin Titanium Sheets............[2017-2019]
    Obtaining Nanostructured Titanium by Twist Extrusion............[2020-2023]
    Mechanical Properties of Surface Nanostructured Titanium Alloys and Their Osteoblastic Response............[2027-2031]
    Chemical-Hydrothermal Synthesis of Bioinert Oxide Films on Ti Substrates............[2032-2035]
    Electrochemical Studies on the Stability and Corrosion Resistance of Ti-6Al-4V Alloy for Biomedical Applications............[2036-2041]
    Surface Modification of Low-Modulus Ti35NbXZr Alloys with Nanotube Arrays............[2042-2045]
    Development of Biomedical Ti-Cr Alloys with Changeable Young's Modulus via Deformation-induced Transformation............[2046-2049]
    Deoxidation of NiTi Alloys Using Metallic Barium and their Microstructures............[2050-2053]
    Microstructure and Mechanical Properties of Biomedical Near-β Ti Alloy TLM with Nanostructure by ARB Process............[2054-2058]
    Deformation Mechanisms in the Ti-25Ta-24Nb Biomedical Titanium Alloy............[2059-2062]
    Development of New Titanium Alloys with Changeable Young's Modulus for Spi-nal Fixation Applications............[2063-2066]
    A New Method to Improve Mechanical and Biological Properties of Ti-6Al-4V ELI............[2067-2071]
    Study of Pore Size Distribution and Interconnection of Open-Cell Titanium and Titanium Alloy Foams............[2072-2076]
    Grain Refinement in α+β-type Ti-4.5Al-6Nb-2Fe-2Mo Alloys through Precipita-tion of TiB or Rare Earth Oxides............[2077-2080]
    The Corrosion Behaviour of Ti20Mo Alloy in Non-pasteurized and Pasteurized Orange Juice............[2081-2085]
    Comparative Study of Ti-6Cr-3Sn Biomedical Alloy in Solution Treated and 473K-Aged Conditions............[2086-2089]
    Micro Arc Oxidation of Porous Ti-25Nb-3Zr-3Mo-2Sn Alloy............[2090-2092]
    A thermomechanical Treatment to Improve superelasticity and Low Modulus of Ti-Nb alloys for Biomedical Applications............[2093-2097]
    Gradation of Mechanical Properties by Local Heating in Beta TiNbSn Alloy............[2098-2101]
    Improvement in Fatigue Strength with Maintaining Young's Modulus Low by Controlling co-phase Precipitation in β-type Ti-Nb-Ta-Zr Alloy............[2102-2105]
    Two-step Gas Treatment of Commercially Pure Titanium for Anatase Layer Formation............[2106-2110]
    Development of Ultrafine and Nano-crystalline Grain Structures during Modified Accumulative Roll Bonding of Titanium Alloy,Ti-25Nb-3Zr-3Mo-2Sn............[2111-2115]
    Oxidation Behavior and Effect of Layer Thickness on Whiteness and Exfoliation Behavior of Oxide Film Formed on Ti-Nb-Ta-Zr Alloy............[2116-2120]
    First-principles Determinations of Geometric Structure and Stability of α" Phase in Binary Ti-xM (M=V,Nb,Mo and Ta) Alloys............[2121-2125]
    Effect of Aging Temperature on Microstructure and Mechanical Properties of Ti-Nb-Ta-Zr-Fe Alloy for Biomedical Applications............[2126-2129]
    Phase Stability and Elastic Constants in Ti-Ta Random Alloys From First-principles Calculations............[2130-2134]
    Structure and mechanical properties of Ti-10Zr-xMo alloys for biomedical applications............[2135-2138]
    Effect of Milling Time on the Microstructure of Ti35Nb2. 5Sn5HA Biocomposite Fabricated by Powder Metallurgy............[2139-2141]
    Effects of Mo Addition on Bond Strength of Ti-5Cr Alloys to Dental Porcelain............[2142-2145]
    Preparation and Electrochemical Behavior of Ca-P Containing Porous Titania Coating on TiNbZrFe Alloy by Micro-arc Oxidation............[2146-2149]
    Effect of Powder Feeding Rate on in Situ Synthesis of HA/Ti Composite Coating............[2150-2152]
    Design of Low Young's Modulus Ti Alloys Using d Electrons Alloy Thoery............[2153-2156]
    Synthesis of Hydroxyapatite Coated Antibacterial Titania Layer on Titanium-Based Biomedical Alloys............[2157-2159]
    First-principles Calculations of the Elastic Poperties of the Teta-Ti-Nb-Zr Ternary Alloys............[2160-2163]
    Investigation of Shape Memory Effect and Superelasticity Behavior of Ti-25Nb-3Zr-3Mo-2Sn Alloys by In-situ Tensile Observation............[2164-2166]
    Porosity and Microstructures of Porous Ti-Mo Alloys for Biomedical Application by Gelcasting............[2167-2171]
    Fatigue Properties and Biocompatibility of Ti-6Al-4V Alloy after EDM Process for Improved Osteointegration-Comprehensive Research Report............[2172-2175]
    Phase Stability and Elastic Properties of Ti-Mo-X (X=Ta,Nb,Zr) Alloys From First-principles Calculations............[2176-2179]
    Young's Modulus of Ti-Cr-Sn-Zr Alloys with Meta-stable Beta Phase............[2180-2183]
    Corrosion Behavior of Biomedical Ti-24Nb-4Zr-8Sn Alloy in Saline Medium............[2184-2188]
    Fabrication and Mechanical Properties of Porous Ti-24Nb-4Zr-8Sn Alloy Devel-oped for Biomedical Application............[2189-2192]
    Characterization of Plasma Sprayed Hydroxyapatite-glass Composite Coatings onto Titatium Alloy Substrate............[2193-2196]
    Research and Development for Practical Use of Ocean Thermal Energy Conversion............[2199-2204]
    Qualification of the High-Strength ASTM Grade 29 Titanium Alloy for Static and Dynamic Corrosive,Sweet and Sour Service............[2205-2209]
    Review of Recent Titanium Research in Australia............[2210-2214]
    Creep Properties of Ti-1Cu Sheet at Elevated Temperatures............[2215-2219]
    Study on Preparing Spherical Nickel Coated Titanium Powders by Electroless Plating and Radio-frequency Plasma............[2220-2222]
    Titanium Powder Metallurgy: Cost Effective Dvelopments............[2223-2226]
    Overview and Prospect of the World Titanium Emerging Applications Market............[2227-2231]
    Effect of Oxygen Hardened Surface Layer on Fatigue Properties of Ti-5Al-2Fe-3Mo with Fine Acicular Microstructure............[2232-2236]
    High-Purity Titanium,Zirconium And Hafnium In Nuclear-Power Engineering............[2237-2239]
    Titanium Application in Structures Operating in Sea Water............[2243-2248]
    Use of Titanium in the Warship Propulsion Sector............[2249-2253]
    Preparation and Characterization of Ti/Ni Core-Shell Structural Powders............[2254-2256]
    The Research and Development of Ti-44528s Alloy and Its Application in Navy Diving Knives............[2257-2259]
    Preparation and Properties of Titanium Nano Modified Epoxy-siloxane Self-stratifying Anticorrosion Coating............[2260-2263]
    Basic Aspects of Creating High-Strength Welded Titanium Alloys for Marine Engineering............[2264-2267]
    The Application and Prospect of Titanium Materials in Marine Engineering Equipments............[2268-2271]
    Ti-2011 Proceedings of the 12th World Conference on Titanium
    当前位置：首页 > 会议文集
    Insert title here

    登录

    登录
    输入用户名登录
    企业注册       个人注册       登录        联系我们       收藏本站       设为首页
    Insert title here